Check three address facts before you compare prices
A "Mechanicsburg, PA" mailing address does not tell an installer which rules apply to your roof. Census 2020 geography shows ZIP 17055 overlapping eight municipalities in two counties: Mechanicsburg borough; Hampden, Lower Allen, Monroe, Silver Spring and Upper Allen townships in Cumberland County; and Fairview and Monaghan townships in York County. The borough covers only about 6% of that ZIP's land. ZIP 17050 overlaps six municipalities, and the borough is about 0.3% of its land.
Those are land shares, not population shares. The borough is the dense part. Still, much of the ground with a Mechanicsburg address sits outside it. One installer's map listing shows the gap well: a "Mechanicsburg, PA 17055" street address for a business it describes as based in Upper Allen Township.
So settle three facts first:
- Borough or township. Your property tax bill or the county parcel record names the municipality. The borough rules on this page (Historic District, solar zoning, street-tree permit) apply only inside Mechanicsburg borough. Each township has its own permit office; ask it directly.
- Inside the Historic District or not. The district centers on the Main Street area; its boundary description begins at Simpson and Main streets, and the map is on file with the Borough Manager. If the panels would show from a street there, a review board and Borough Council come before any permit. That can add two months or more.
- PPL or Met-Ed. PAPowerSwitch, the state's electricity shopping site, lists both Met-Ed and PPL for ZIP 17055 and only PPL for 17050. On a 17055 address, the bill decides. Your utility delivers the power. If you have switched, an electric generation supplier (EGS) named on the bill sells you the electricity itself. Both names change what your panels save and what leftover credits pay at year end.
Write the three answers at the top of every quote you collect. A quote that leaves them blank was priced for a generic Pennsylvania house, not yours.
Historic District: HARB and Council come before any permit
Mechanicsburg's Historic District ordinance, Chapter 10A of the Borough Code, requires a Certificate of Appropriateness (CoA), the borough's written approval of how a change will look, for exterior work in the district that can be seen from a street or public way. Installing equipment the zoning or building code regulates counts when it changes what people see from the street. Panels on a visible roof fit that description.
The code sets the order. The Historical Architectural Review Board (HARB) reviews and recommends. Borough Council decides and issues the certificate. The Permit Officer "shall not issue a permit" until Council has done so.
It also sets the clock:
- You get notice of the HARB meeting at least 10 days ahead.
- HARB recommends no later than 45 days after the meeting that considered your application, and reports to Council within 10 days.
- A recommendation against your plan names the changes that would satisfy HARB. The report is held 10 days so you can decide whether to revise.
- Council decides. A written disapproval goes to you, the Permit Officer and the Pennsylvania Historical and Museum Commission.
The borough's page, read from a dated copy, said HARB meets the first Monday of the month, applications are due two weeks before, and there is no fee. Confirm all three with the borough before you count on them.
What the HARB package needs
The borough's HARB application asks for elevation drawings or sketches, photos of every side visible from the street, detail photos of the features affected, catalog cuts of the proposed materials (for solar, the panel and racking spec sheets), samples if possible, and the streets from which the change will be visible. The form cites a $300-per-day penalty under the chapter. Nobody should start work on a visible roof before the certificate.
The HARB guidelines we read do not mention solar; ask before you design. Have the installer price a rear-plane layout alongside the preferred one, so a HARB request for changes does not restart the whole comparison.
Illustrative example: HARB timeline. A homeowner near Main Street wants panels on the street-facing roof. On the dated schedule, an application filed by Monday, December 21, 2026 reaches the Monday, January 4, 2027 agenda. If HARB uses its full 45 days, the recommendation is due by February 18 and reaches Council by February 28. Only after Council issues the certificate can the borough issue the zoning and building permits.
A quote promising "permits in 3–4 weeks" does not fit that address. The months belong in the payment comparison too. A cash or loan price must hold that long, and a lease or power-purchase agreement price may depend on the date the system goes into service.
Harrisburg runs its own HARB and permit route, so a city property follows different rules; the Harrisburg page covers it.
Borough zoning and permits: what Codes & Zoning will ask for
Borough solar runs through Codes & Zoning Enforcement at 36 West Allen Street, after the certificate if the house is in the Historic District. You need two permits. A zoning permit says the project is allowed on this lot, in this position. A building permit says it is built safely under the construction code.
The solar section of the zoning code
Section 27-505 of the borough zoning code allows solar collectors in every zoning district, on the house or as a detached accessory structure. Four parts belong in any quote:
- Front yard. A collector may not be erected in a front yard or between the front lot line and the front facade. Ask the Zoning Officer whether a front roof plane counts before the layout is final.
- Solar-access statement. A statement that the system is installed is filed with the Zoning Officer on the date the zoning permit issues. It protects the collector against shade from structures or plantings a neighbor adds later.
- What is protected. The portion a hypothetical 12-foot obstruction on the lot line would leave unshaded from 10 a.m. to 3 p.m. Ground mounts are not protected, and neither is shade from existing structures or trees.
- One-year clock. The system must be finished, and the Zoning Officer notified, within one calendar year.
Protection is capped at half the floor area of the largest floor of the building served. On a small borough house, that cap can be lower than the array.
| Illustrative example: protected area | Value |
|---|---|
| Largest floor of the house | 900 sq ft |
| Most collector area the statement can protect | 450 sq ft |
| Not protected | Ground mounts; existing trees and buildings |
The zoning and building permits
The borough's zoning permit form asks whether the property is in the Historic District and whether HARB approval has been obtained. It needs a dimensional plot plan and a signed form. Checking deed covenants and owners' association guidelines is left to you. The Codes & Zoning Enforcement page listed a $55 payment with the application in a September 2025 dated copy; confirm it. Any aggrieved party may appeal a permit within 30 days of issuance, so ask the installer whether they wait out those 30 days before ordering equipment.
The building permit application asks the HARB questions again. It requires two sets of plans (residential plans need not be professionally drafted), electrical plans with load calculations and equipment specs, and a liability certificate naming the borough. Inspections follow the Pennsylvania Uniform Construction Code. We could not confirm the current fee, review time or inspecting agency; ask the Codes office.
Street trees and utility interconnection
Pruning or removing a shading street tree in the tree lawn takes a Shade Tree Commission tree permit. Settle that before the production estimate assumes the tree is gone. If it stays, ask for the estimate with the tree in place.
On the utility side, state rules give certified-inverter home systems of 10 kW or less the simplest (Level 1) interconnection review.
Met-Ed or PPL: what your surplus kilowatt-hours earn
Both utilities follow the state net metering rule, 52 Pa. Code §75.13. Exported kilowatt-hours earn full retail credit, meaning generation, transmission and distribution charges, up to what you use over the year. Credits left when the year closes are paid at the price to compare: the utility's default generation and transmission price, the number supplier offers are measured against.
The same rule pays differently at each utility, and Mechanicsburg's two ZIPs show both prices:
| Through November 30, 2026 | Met-Ed (FirstEnergy Pennsylvania) | PPL Electric Utilities |
|---|---|---|
| Price to compare (year-end payout) | 13.951¢/kWh (17055 listing, updated Oct 15) | 13.079¢/kWh (17050 listing, updated Nov 2) |
| Average residential price behind EcoGen's savings figures (State benchmark) | 19.087¢/kWh | 18.286¢/kWh |
Sources: PAPowerSwitch; EcoGen Solar Cost Index, September 2026 Edition. The same panels save more on a Met-Ed bill, and leftover credits pay more. Both prices to compare reset December 1, 2026; check the current figure on PAPowerSwitch before you compare.
What this means at your address: on a 17050 address only the PPL column applies. On a 17055 address, read the bill. A quote that uses Met-Ed's figures for a PPL house overstates the savings, and the reverse understates them.
If you buy generation from a supplier, §75.13(f) says the generation credit follows your supplier contract. Ask the supplier in writing; a quote assuming full retail credit may overstate savings.
New Cumberland's ZIP is split between the same two utilities; the New Cumberland page runs that check with its own permit route.
One design, four ways to pay, at Met-Ed and at PPL
Four terms first. With a loan you own the system; a dealer fee is a charge for the loan's rate built into the amount you borrow, 15% to 30% of the principal per EcoGen. With a lease, a company owns the panels and you pay monthly. With a power-purchase agreement (PPA), a company owns them and you pay per kilowatt-hour produced. An escalator is the yearly increase in a lease or PPA payment, 1.9% to 2.9% per EcoGen.
Illustrative calculation. One 8.26 kW design producing about 11,556 kWh a year at $2.87 per watt: $23,706 cash (State benchmark, modeled installed price before incentives, EcoGen Solar Cost Index, September 2026 Edition). Year-one bill value comes from EcoGen's Pennsylvania solar cost page, which prices each utility separately: $2,206 at Met-Ed, $2,113 at PPL. Example terms, not offers: a 6.99%, 25-year loan with a 20% dealer fee; a $150 monthly lease, flat in year one; a 13¢ PPA.
| Same design, year one | Cash | Loan | Lease | PPA |
|---|---|---|---|---|
| What you agree to | $23,706 up front | $29,632 principal ($3.59/W), 6.99%, 25 years | $150 a month | 13¢ per kWh |
| Paid in year one | $23,706 once | about $209 a month, $2,511 | $1,800 | 11,556 × 13¢ = $1,502 |
| Bill value minus payments, Met-Ed ($2,206) | $2,206 a year once paid; 10.7-year simple payback before incentives | −$305 | +$406 | +$704 |
| Bill value minus payments, PPL ($2,113) | $2,113 a year once paid; 11.2-year simple payback before incentives | −$398 | +$313 | +$611 |
| Owns it and keeps SRECs | You | You | Lease company | PPA owner |
| Federal credit | None for owned systems placed in service after 2025 | None | Owner may claim §48E | Owner may claim §48E |
| Timeline question | Does the price hold through HARB and Council? | Does the loan offer hold that long? | Does the price depend on the owner's in-service date? | Same |
Loan convention (Illustrative calculation): the 20% fee is a share of the principal, so $23,706 ÷ 0.80 = $29,632. A lender adding 20% on top of the cash price instead gives about $28,450. Ask which method yours uses.
How to read it:
- The utility gap is $93 in year one under every column. It never changes the order, but it sets how thin a margin is: the same lease clears $406 at Met-Ed and $313 at PPL.
- The loan is negative because of the fee. The fee adds $5,926 to the principal. Without it, the loan would cost about $2,009 a year and net +$197 at Met-Ed or +$104 at PPL (Illustrative calculation).
- Cash is not comparable row for row. It pays nothing after day one, so it keeps the full bill value every year, but it ties up $23,706. The payback years are the fair comparison.
- The PPA clears the most of the three financed options, but its owner keeps the solar renewable energy credits (SRECs), and an escalator raises the price every year. Ask for the 25-year total, not the year-one net.
SRECs are certificates earned per megawatt-hour of solar output that an owner can sell. EcoGen reports a Pennsylvania average of $28.26 per megawatt-hour for the year to May 31, 2026, with a range of $4 to $81. At that average this design's output is worth about $327 a year (State benchmark, volatile). Cash and loan buyers keep it; lease and PPA customers give it up. That narrows the PPA's lead over a fee-free loan. Make sure the sheet shows it.
Check the price per watt before you compare payments
Price per watt ($/W), the system price divided by its DC watts (the panel rating), tests whether a cash price is fair.
- Strip lines that are not the array: battery, re-roofing under the array (EcoGen: $2,000 to $6,000), a 100 to 150 amp service upgrade (EcoGen: $2,000 to $4,000), and any separately billed HARB drawings.
- Divide the rest by DC watts. $23,706 for 8,260 watts is $2.87/W.
- Compare with the state benchmark. EcoGen's September 2026 Edition puts Pennsylvania at $2.87/W before incentives, with a typical band of $2.56 to $3.16 (State benchmark). That is the testable answer to "how much are solar panels in PA?"
For a loan, divide the principal. The loan above comes to $3.59/W, well above the band, and the dealer fee is why.
In Mechanicsburg, run the division twice when HARB or the front-yard rule is in play. A rear-plane fallback may hold fewer panels, so its total price can drop while its price per watt rises. Divide each layout's price by its own watts and ask for each layout's yearly production. Then rebuild the four payment columns on the smaller layout. A per-kWh PPA bill shrinks with the output, but a flat $150 lease does not, so a lease margin that was thin on the preferred design can turn negative on the fallback.
EcoGen notes that a certificate requirement adds time and cost. If HARB asks for a different layout or mounting, the quote should show it as its own line, not inside the per-watt price.
Tax credits, lease timing and battery pay in 2026
Is there still a 30% solar tax credit in 2026? Not for a system you own. The IRS says the Residential Clean Energy Credit is not available for any property placed in service after December 31, 2025. A quote that subtracts 30% from an owned system is wrong.
With a lease or PPA, the owner may claim the §48E credit. EcoGen reports that a project starting construction after July 4, 2026 must be in service by December 31, 2027; we have not confirmed that date at the IRS. A Historic District project waiting on Council has less room than a township house with a permit in hand. Ask whether the lease or PPA price assumes the credit and what happens to your price if the in-service date slips.
Batteries split by utility too, which matters on a 17055 address. PPL pays enrolled battery owners through its Optimized Battery program. FirstEnergy Pennsylvania's program for Met-Ed customers had not opened when EcoGen checked on October 1, 2026. A battery pitched with utility payments should say which utility it assumed.
What the proposed service would put in writing for a Mechanicsburg address
Proposed service. Solar Grids Central PA is a proposed solar service; coverage of Mechanicsburg is proposed and not yet confirmed. The proposed service would freeze one design per address and price it as cash, loan, lease and PPA on identical rows, the four-way comparison sheet described on the home page, before you sign anything.
For a Mechanicsburg address, the sheet would add:
- Top rows for borough or township, Historic District yes or no, and your utility and supplier.
- Where HARB applies, a rear-plane HARB fallback layout priced the same four ways, with its own watts and production.
- A savings line with year-one value and the dated year-end payout at your utility.
- An SREC line showing who keeps the certificates under each option.
- A timeline row covering HARB and Council, both permits, the one-year clock, and whether a lease or PPA price depends on the in-service date.
- One row on what happens to each option if you sell the home, and a battery as one optional line.
Who files what
The responsibility sheet would name one person or company for each step:
| Step | What it involves |
|---|---|
| HARB package | Elevations, street-side photos, spec sheets, visible streets |
| Solar-access statement | Filed with the Zoning Officer on the zoning-permit date |
| Zoning permit | Form, plot plan, fee, Historic District answer |
| Building permit | Two plan sets, electrical plans, insurance naming the borough |
| Shade Tree permit | Only if a street tree is pruned or removed |
| Completion notice | Zoning Officer notified within one calendar year |
| Utility application | Interconnection and net metering with PPL or Met-Ed |
| SREC registration | Owned systems only: PennAEPS, then PJM-GATS |
It would also follow a "sign nothing yet" rule: no credit pull and no contract at the assessment visit.
Mechanicsburg quote checklist: ask before you sign
Use this with every installer, alongside the quote checklist on this site.
| Check | Who confirms it | Why it matters here |
|---|---|---|
| Borough or township | You (tax bill, parcel record) | Sets the permit office and whether borough rules apply |
| Utility and supplier | You (the bill) | 17055 lists both utilities; a supplier sets the generation credit |
| Historic District status | Borough Codes office | Visible panels need HARB and a Council certificate first |
| HARB package and fallback price | Installer | Who prepares it; rear-plane layout priced four ways |
| Front roof plane | Zoning Officer | §27-505 bars collectors in the front yard area |
| Solar-access statement, one-year clock | Installer, Zoning Officer | Later-shade protection; completion deadline |
| Street tree | Shade Tree Commission | Permit needed to prune or remove |
| Loan fee method, escalator, 25-year total | Lender, lease or PPA company | Year one hides the fee and the yearly increase |
| SRECs | Installer, lease or PPA company | Worth about $327 a year at EcoGen's average; who keeps them |
| In-service date assumption | Lease or PPA company | The owner's credit may depend on it |
| Service if the installer closes | Installer, lease or PPA company | Who answers for the system and its warranties afterward |
Then check the contract. Pennsylvania's Home Improvement Consumer Protection Act (HICPA) requires the contractor's registration number on it, gives you three business days to cancel, and caps the deposit. Whether it covers a lease or PPA is unsettled in what we read; ask.
Three phrases should slow you down in Mechanicsburg:
- "30% tax credit" on a system you would own. It ended for systems placed in service after 2025.
- "Permits in 3–4 weeks" for a Historic District house. HARB and Council come first, and HARB alone may take 45 days after its meeting.
- "0% down" with no loan terms, dealer fee or escalator in writing. Ask for all four options on one sheet first.
